Model:PB100
The PB100 is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify samples in 0.2 - 1000 ml of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process. During operation, the suspended material is drawn into the bottom half inch of the homogenizer probe by a rotor turning at 35,000 rpm. The material is repeatedly cycled through narrow slits in the probe where it is rapidly sheared and disintegrated by high frequency mechanical action.
Four different probe sizes are avaliable - the SP04, SP06, SP08, and SP10. Unlike most other Brands of rotor-stator homogenizer, the PB100 comes complete with both the high speed motor and a stainless steel probe of your choice.
Features:
● Use for mixing, emulsification, shredding, or chopping
● Practical answer for small samples
● Easy to hold and light weight for one hand operation. Can also be stand mounted
● Autoclavable stainless steel probes. Inert to aggressive solutions
● All probes are interchangable and are easily removed for cleanup
● High speed motor. Variable speed control from 5,000 to 35,000 rpm
Sample Volume Range: 0.2 to 1000 ml, depending on the probe selected (see table)
● Probes made of Type 316 Stainless Steel with flurocarbon bushings
● Weight: Approximately 3/4 Kg
Specifications:
* Dimensions taken from stator.
Catalog Number |
Working Range (ml) |
Probe Diameter (mm) |
Probe Length (cm) |
PB100-SP04 |
0.2-5.0 |
4 |
42 |
PB100-SP06 |
0.2-10 |
6 |
48 |
PB100-SP08 |
1.0-60 |
8 |
85 |
PB100-SP10 |
1.0-1000 |
10 |
140 |
Note:The PB100 comes complete with a high speed, variable speed electric motor, one probe of your choice and a plastic storage stand.* All PB100 are priced the same. All probes are interchangable with the PB motor.